High Pressure Pumps – M series

MAXIMATOR pumps M series are available as single or double acting with either a single, double or triple air drive head. For air drive pressures from 1 bar (14.5 psi) minimum to 10 bar (145 psi) maximum.

M pumps

• single acting
• single air drive head
• Pressures to 2,200 bar (31,900 psi)

M pumps are single acting types with single air drive head. They are compact lightweight and feature rugged construction.

• M4 to M12 pumps have aluminium bodies and stainless steel plungers. M22 to M189 have stainless steel bodies and plungers. All M pumps have polyurethane seals with Buna ”N” O-rings, UHMWPE package and Viton O-rings for water service is available as option.
• All M pumps are standard with bottom inlet, side inlet is available as option.

Options for M series

• Seal material for oil use (standard pump): Order code: M37 – (L)
• Seal material for water use: (not available for M …-2/M…-3 and M …-01H types) Order code: M37 – (L)VE / M37D – VE
• Special seal material to handle special fluids: Order code: See fluid compatibility guide
• Side inlet for single acting versions: Order code: M37(L) – S / M37(L)VE – S
• External pilot port modification: (only available for M22 to M189 single acting, single air drive head types) Order code: M37 – DIR
• Spring return and hand lever attachment: (modification only available for M22 to M189 single acting, single air drive head types) Order code: M37 – 01H
• Special inlet and outlet ports (i. e. NPT): M37 – NPT
• Air control unit for M series with filter pressure regulator, control pressure gauge and shut-off valve: Order code: M37 with C1
• To protect the pump against excessive outlet pressures, an air safety valve can be fitted to the air control unit: Order code: M37 with C1/SVair
  (The outlet pressure has to be indicated.)
• Other options available on request.